News

After an Industrial Repaint: Keep a Useful Paint Record

By October 27, 2026No Comments

The repaint is finished, the access equipment has gone and the building looks better. Before the paperwork disappears into an email folder, there is one more useful job: record what was painted and what was used.

It does not need to become a complicated manual. A short, organised record can help when a wall is damaged, a tenant changes or another contractor needs to understand the existing finish. “The grey paint from a few years ago” is not much to work with.

Record the area, not just the building

A warehouse address might cover external cladding, office walls, roller doors and several areas that were left untouched. A single note saying “building repainted” loses those distinctions.

Break the record into recognisable locations: front elevation, loading-side wall, office reception, staff room or numbered roller doors. A marked-up plan can help, but a few clearly labelled photographs may be enough for a smaller job.

Include the completion date and identify anything excluded from the work. If painting was completed in stages, record those stages separately rather than giving the whole property one date.

Keep the product details with the colour

A colour name is only part of the information. Ask for the product name, colour reference and finish for each area, along with the agreed coating specification or product schedule where available.

This is particularly useful where a property combines industrial painting with office or commercial painting. Do not assume the paint on an office wall is the same product used elsewhere on the site, even if the colours look similar.

Keep the information in writing rather than relying on a photograph of a faded tin label. If a later repair is needed, give those details to the contractor so the existing finish can be assessed before a product is selected.

Save the relevant documents, not a pile of unrelated brochures

Keep the accepted scope, variations and any product or care information supplied for the completed work together. Where applicable, include written warranty terms rather than relying on a general statement from a website.

For manufacturer information, Dulux Protective Coatings publishes technical and safety data sheets. Match the document to the actual product and retain the version supplied for the project. A general product page is not a substitute for advice specific to your building.

Agree the handover information with the contractor before completion. Not every painting quote includes the same documentation.

Photograph the finished areas while the details are clear

Take an overall photograph of each painted area and enough detail to identify its location. Name the files so someone unfamiliar with the project can understand them. “Loading entrance, east wall, October 2026” is more useful than “IMG_1042”.

Trade Painters’ published 23 Luke Street, Lytton project describes exterior painting and commercial roller-door work. That illustrates why separating building areas in the record is useful: a door and the surrounding exterior are not simply one item called “the front”.

Keep later changes in the same place

If a section is repaired or repainted later, add the date, area and new product details. Keep the earlier information rather than overwriting it. Otherwise, the next person may assume every surface still has the original finish.

Give the nominated property or facilities contact access to the record. When management changes, pass it on with the other building documents instead of leaving it in a former employee’s inbox.

The record does not replace an inspection or tell someone how to prepare and recoat a surface. It gives the next conversation a better starting point.

Planning painting work at your property?

Send Trade Painters the address, areas involved and any existing paint records or specifications. If those details are missing, say so. We can discuss the proposed scope and what needs to be checked. Request an industrial painting quote.